Clue #1  Vertical/Portrait card, Gather your supplies: 
Easy-peasy card featuring BOTH sides of your pretty 6x 6 DSP!! Remember, you can cut a 12 x 12 into 6 x 6 pieces.
Colored Card Stock A card base:
–   1 @ 5-1/2 x 8-1/2 
DSP:
–   1 @ 6 TALL x 6 WIDE, with an overall pattern. Best to like both sides of your DSP. You will see more of one side than the other. Score at 1-3/8 on all 4 sides of your square DSP. Cut out the corners. Then cut from the top right of each rectangle down to the left corner. See pictures below.
Card Stock B:
–   1 @ 3-1/2 x 3-1/2 complimentary to DSP
Card Stock C:
–   1 @ 5-1/4 x 4 complimentary to DSP
White/Vanilla Card Stock (CS):
–  1 @ scrap for sentiment
Embellishments: 
–   for embellishments, use something that goes along with your DSP, not too big

Fold on the score lines, tucking the large end under the point of the previous side, all the way around the square.

Want to use up those corner pieces you cut off? Here are 2 ideas!

And if you are still with me, you can take the for triangles you cut off the sides and lay them out like the folded square and make another card.

I hope you like this easy fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

Clue #1  Vertical/Portrait card, Gather your supplies: 
Colored Card Stock: card base*
–   1 @ 5-1/2 x 4-1/4 OPTIONAL If putting this on the back of your card, cut your DSP to only 5-1/4 TALL X 12 WIDE.
DSP:
–   1 @ 5-1/2 TALL x 12 WIDE, best to like both sides of your DSP. You will see more of one side than the other. Score at 3, 6-1/2, 10-1/2. Your front of card will be the left end 3” panel; fold mountain, valley, valley.
White/Vanilla Card Stock (CS):
–  1 or 2 @ approx. 3 x 4-1/2 Rectangle, Oval, Arch, Label or a little smaller. There are SO many options to finish your card. I used ovals matted with oval scallops behind, 2 sizes of the old Deco Labels Dies, and more. Look at the samples to see what you might like to do for your card!
Embellishments:  
–   for embellishments, use something that goes along with your DSP. You can use a lot or just a little.

I hope you like this easy fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

Clue #1  Vertical/Portrait card, Gather your supplies: 
Colored Card Stock: card base
–   1 @ 8-1/2 x 5-1/2, score at 4-1/4. Mark 2-1/2″ from the top right corner in toward the fold. Cut from the mark down to the bottom right corner.
–   1 @ 1-1/2 x 5-1/2, cut from the top left corner down to the bottom right corner.
DSP:
–   1 @ 5-1/4 tall x 4 wide. Mark 2-1/2″ from the top right corner. Cut from the mark down to the bottom right corner. Save the cut off triangle for another card.
–   1 @ 5 tall x 2-1/4 wide, different from first piece. Cut from the top left corner down to the bottom right corner. Then cut 3/8″ off the base of this triangle
White/Vanilla Card Stock (CS):
–  1 @ 4 x 5-1/4 
Embellishments:  
–   for embellishments, use something that goes along with your DSP but isn’t too large. Adding just a sentiment on the front is great, too.

Layer the small DSP on the small triangle and the larger triangle DSP on the larger triangle. Then layer on the card base creating a fan, keeping your tips inside the cardbase.

I created my card from a card I made at a demonstrator shoe box swap, so I have no directions. Karla suggested Mary Deatherage’s directions found here. Her measurement at the top is not the same as mine. She has each piece of DSP matted on her card.

I hope you like this Fan Fold fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

Clue #1  Vertical/Portrait card, Gather your supplies: 
Colored Card Stock: card base
–   1 @ 4-1/4 x 11, score at 3-1/4, 6-1/2, 8-3/4
–   2 @ 3 x 3, can be the same as the base or a complimentary cardstock color

DSP: 
–  1 @ 2 tall x 4 wide
–  1 @ 3 tall x 4 wide

White/Vanilla Card Stock (CS):
–  2 @ 2-3/4 x 2-3/4, both are focal points of the card, turned on point. Neither square has to be white/vanilla. Both can be DSP with die cuts on them. Both could be embossed card stock, the same color as the base or complimentary. Or do one of one type and the other a different type.
Embellishments:  
–   for embellishments, use something that goes along with your DSP that does not go too far out of the 3 x 3 turned on a point.

I hope you like this fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

Clue #1  Vertical/Portrait card,
Gather your supplies: 

Colored Card Stock: card base
–   1 @ 4-1/4 x 5-1/2
–   1 @ 3-1/8 x 6, score at 1/2 from one end on the long side. Adhere to the top of the card base keeping the fold inside the card. Can be centered, left or right.

DSP: 
–  1 @ 5-1/2 x 3. Adhere over the outside of the 3-1/8 flap, leaving only narrow edges on the sides, not the top or bottom.

White/Vanilla Card Stock (CS):
–  1 @ 3 or 3-1/8 (your choice) x 5-1/2 (writing panel). Goes under the front panel and over the flap, completely covered by the panel.

Embellishments:  
–   for embellishments, use something that goes along with your DSP

I hope you like this fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

This card was for my faithful Monday Night Mystery Stampers! Join us and you, too will get extra perks!
I hope you like this fun-fold card! Please join us if you like to make a card without knowing what it is until you are done!!

I really like this card for using DSP and a nice focal panel.

Clue #1  Vertical/Portrait card, Gather your supplies: 

Colored Cardstock: 
–  1 @ 5-1/2 x 6-3/8, score on the long side at 4-1/4

–  1 @ 3-1/2 x 4, score at 2 on the long side, attach on the outside flap of the card base, putting the fold over the edge of the card base BEFORE adding DSP

Coordinating Colored Card Stock:
–   1 @ 3-1/4 x 3-3/4, layer this onto the 3-1/2 x 4 piece above, with adhesive ONLY on the bottom half

Designer Series Paper (DSP):
–  1 @ 1-7/8 high x 5-1/4 wide
–  1 @ 1-1/2 high x 5-1/4 wide, layer this on the 5-1/4 x 4 White/Vanilla piece, attach inside card

White/Vanilla Card Stock (CS):
–  1 @ 5-1/4 x 4
–  1 @ 3 x 3-1/2, This is your focal point.  It is 3 wide and 3-1/2 tall.

Embellishments small to medium:  
use something that goes along with your DSP and something small to make the front panel stand up and it folds flat to mail

I hope you like this fun-fold card! Please join us if you would like to make a card without knowing what it is until you are done!!